手术台台面低升降采用液压控制.
动物手术台/小动物手术台 型号:DP-DWV
中文:
1、手术台台面低升降采用液压控制.
2、工作台面左、右分别倾斜15°,采用机械手动操作。
3、整体结构紧凑、性能可靠合理、操作方便。
4、上升台面踩动踏杆、下降时将踏杆踩到底轻压台面即可。
5、底座均是采用A3钢板电脑烤漆,配置活动轮便于移动。
6、手术台可加装显微镜及手术用具托盘。
7、台面zui低820mm,zui930mm。
ENGLISH:
1、 operating table surface level movements using new hydraulic control.
2、 the table left and right respectively, 15 ° tilt, mechanical manual operation.
3、 the overall structure is compact, reasonably reliable, convenient operation.
4、 by stomping on dynamic table-riding, down-stomping on Tap will in the end be REDUCTION table.
5、 the base plate is used A3 computer paint, configuration round activities to facilitate movement.6、 the operating table and surgical microscopes can install equipment tray.
7、 countertops minimum 820mm, 930mm maximum.
产品技术参数 Product Major Parameter:
1. 台面长度和宽度 Table Size(L*W)
1400×600mm
2. 台面离地度 Table Height(up/down)
820~930mm
3. 台面前后zui大倾角 Swing Angle For Both Front And Rcar Of The Table
±15
4. 各传动关节间隙(稳定性可靠)Stable And Reliable Clearancc For Transmission Joints
0
5.重量:300斤。
台面为碳钢烤漆材质。
2.
商品名称:微波漏能检测仪/微波漏能测试仪/微波漏能测定仪
商品型号:DP-HI1501

微波漏能检测仪/微波漏能测试仪/微波漏能测定仪 型号:DP-HI1501
微波漏能检测仪/微波漏能测试仪/微波漏能测定仪 说明:
DP-HI1501是公司生产的通用的微波检漏仪,被美政府认可用于微波炉的检测。该设备测量、携带方便,为微波炉生产厂商、服务工程师、管理部门和公共安全监察部门提供方便,快速,准确,灵敏度的泄露检测。该仪器适合CDRH/FDA对微波炉终测试的相关要求。根据测量中泄漏情况的严重程度不同有三段量程可选,测量范围0.1-100 mW/cm2,且泄露强度量程不会损坏仪器,电池供电。
微波漏能检测仪/微波漏能测试仪/微波漏能测定仪 点:
2450MHz下校准
三段量程
灵敏度
电池启动
技术参数:
检测频率:2450MHz
量 程: 0-2,0-10,0-100mW/cm2
精 度: 1.0Db (0-2, 0-10量程)
响应时间: 阶式信号输入达到终值90%,快:<1秒;慢:2.5秒
zui大能量密度:2.0 W/cm2
探头长度: 30 cm (12 inches)
电缆长度: 1.2 m (4')
尺 寸: 89 x 153 x 64mm
重 量: 5lbs
供 电: 2V电池(2)